设为主页  加入收藏
 
·降噪(ANC)蓝牙耳机方案/内置DSP音效处理单芯片蓝牙音响方案 ·马达驱动IC ·2.1声道单芯片D类功放IC ·内置DC/DC升压模块的D类功放IC ·无线充电方案 ·无线遥控方案
当前位置:首页->技术分享
AD82584F 带I2S输出,用于智能音箱语音辨识的2x25W立体声数字音频功放
文章来源:永阜康科技 更新时间:2018/3/2 14:50:00

AD82584F-2x25W Stereo/1x50W Mono Digital Audio Amplifier With 30 bands EQ and DRC Functions

Description

AD82584F is a digital audio amplifier capable of driving 25W (BTL) each to a pair of 8 load speaker and 50W (PBTL) to a 4 load speaker operating at 24V supply without external heat-sink or fan requirement with play music. AD82584F provides advanced audio processing functions, such as volume control, 30 EQ bands, audio mixing, 3D surround sound and Dynamic Range Control (DRC). These are fully programmable via a simple I2C control interface. Robust protection circuits are provided to protect AD82584F from damage due to accidental erroneous operating condition. The full digital circuit design of AD82584F is more tolerant to noise and PVT (Process, Voltage, and Temperature) variation than the analog class-AB or class-D audio amplifier counterpart implemented by analog circuit design. AD82584F is pop free during instantaneous power on/off or mute/shut down switching because of its robust built-in anti-pop circuit.

Features

16/18/20/24-bits input with I2S, Left-alignment   and Right-alignment data format  PSNR & DR(A-weighting) Loudspeaker: 108dB (PSNR), 108dB (DR)@24V  Multiple sampling frequencies (Fs) 8kHz and 32kHz / 44.1kHz / 48kHz and 64kHz / 88.2kHz / 96kHz and 128kHz / 176.4kHz / 192kHz  System clock = 64x, 128x, 192x, 256x, 384x,  512x, 576x, 768x, 1024x Fs MCLK system: 256x~1024x Fs for 8kHz 64x~1024x Fs for 32kHz / 44.1kHz / 48kHz 64x~512x Fs for 64kHz / 88.2kHz / 96kHz 64x~256x Fs for 128kHz / 176.4kHz / 192kHz BCLK system: 64xFs for 32kHz / 44.1kHz / 48kHz 64xFs for 64kHz / 88.2kHz / 96kHz 64xFs for 128kHz / 176.4kHz / 192kHz  Supply voltage 3.3V for digital circuit 8V~26V for loudspeaker driver  Supports 2.0CH/Mono configuration  Loudspeaker output power@12V for stereo 1W x 2CH into 6 <0.1% THD+N 9W x 2CH into 6 <1% THD+N  Loudspeaker output power@18V for stereo 15W x 2CH into 6 <1% THD+N  Loudspeaker output power@24V for stereo 25W x 2CH into 8 <1% THD+N  Sound processing including: 30 bands parametric speaker EQ Volume control (+24dB~-103dB, 0.125dB/step) Dynamic range control Three Band plus post Dynamic range control Power Clipping Programmed 3D surround sound Channel mixing Noise gate with hysteresis window Bass/Treble tone control DC-blocking high-pass filter Pre-scale/post-scale  Anti-pop design  Level meter and power meter   I2S output with selectable Audio DSP point  Short circuit and over-temperature protection  Supports I2C control without clock  I2C control interface with selectable device address  Support hardware and software reset  Internal PLL  LV Under-voltage shutdown and HV Under-voltage detection   Over voltage protection  Power saving mode

Applications

TV audio  Boom-box, CD and DVD receiver, docking system  Powered speaker  Wireless audio

 
 
 
    您可能对以下产品感兴趣  
产品型号 功能介绍 兼容型号 封装形式 工作电压 备注
HT560 2X40W/18V/4Ω或75W/24V/4Ω QFN-36 4.5V-26V 30W立体声D类I2S输入音频功放
双节锂电池7.4V供电实现2X20W音频放大/升压/USB充电组合解决方案 PO at 1% THD+N, VIN = 7.4V ,2X18W((BOOST升压值为15V)) 6V-8.4V
HT7178 HT7178是一款高功率、全集成升压转换器,带有负载关断功能的栅极驱动,集成11mΩ功率开关管和13mΩ同步整流管,为便携式系统提供高效的小尺寸解决方案。 TPS61088 DFN-20 2.7V-14V HT7178(20V 12A带输出关断的全集成同步升压IC)
HT317 2X42W/18V/4Ω或75W/24V/4Ω TSSOP-28 5V-26V 42W立体声/75W单声道D类功放IC,,工作电压5-26V,极限耐压32V!
CS5080 CS5080E是一款5V输入,支持双节锂电池串联应用,锂离子电池的升压充电管理IC.CS5080E集成功率MOS,采用异步开关架构,使其在应用时仅需极少的外围器件,可有效减少整体方案尺寸,降低BOM成本。CS5080E的升压开关充电转换器的工作频率为600KHz最大2A输入充电,转换效率为90%。 ESOP-8 3.44V-7.0V 5V USB输入、双节锂电池串联应用、升压充电管理IC
 
 
    相关产品  
 
 
·HT7178(具有12A开
·HT317(42W立体声/
·HT97220(免电容高保
·CS5080(5V USB
 
PAM8908 HT97220 CS5080 MAX97220 HT8691 冥币印刷机 滴灌带 发电机组 烧纸印刷机

版权所有:深圳市永阜康科技有限公司  粤ICP备17113496号
服务热线:0755-82863877  手机:13242913995
E-MAIL:panxia168@126.com

地址:深圳市宝安西乡航城大道航城创新创业园A4栋218